FRIDA

Combining Beauty with Power
Our most extremely accomplished bookshelf loudspeaker. 

GOES BELOW 30 Hz

You need to hear it for yourself. 
Frida is dynamic, highly resolving, and very evenly balanced throughout the frequency spectrum. Frida is for everyone whose budget and audio aspirations exceed their living space limitations. We would go so far as to say that this speaker has no equal when it comes to size, sound, and design.

The Highest Quality

In-house production in Denmark at our BEAUTIFUL island, Bornholm. 

The cabinets are fabricated using a 5-layer solid tiger bamboo extreme (26mm). By mixing carbonized and natural bamboo strips, each panel is unique. 

The front baffles are made from aircraft aluminum produced on 5-axis CNC machines and are designed with a distinct pattern to minimize reflections for optimal sound reproduction. The cabinets are fabricated using a 5-layer solid tiger bamboo extreme (26mm). By mixing carbonized and natural bamboo strips, each panel is unique. 

The front baffles are made from aircraft aluminum produced on 5-axis CNC machines and are designed with a distinct pattern to minimize reflections for optimal sound reproduction.

Top End Components

The crossover is a 12 dB Linkwitz/Riley with incorporated T.I.M. reduction circuits 2750 Hz 12 dB per octave.

The tweeter by SB Acoustics is a 38 mm ring radiator selected to reproduce overtones freely, detailed, with very high resolution, and no tendency for intrusive resonances.

For the mid and low frequencies, we use a 5-inch woven mineral cone by SEAS with excellent internal damping and extremely linear frequency response.

The optimized center bullet reduces compression due to temperature variations in the voice coil.

The lower suspension reduces sound reflection air flow noise and keeps cavity resonance to a minimum.

Ready to Connect

With terminals from WBT, Miflex, and Jantzen 3mm coils,  and internal wiring from Van den Hul in a special hybrid configuration of pure copper and silver plating, Frida ensures unparalleled signal processing and minimal signal degradation. 

Specifications FRIDA

Terminology: 2-way passive loudspeaker

Dimensions (cm)
22 W x 35 H x 34 D 

Weight (kg): 12.5 (without speaker stand)

Accessories: a speaker stand in aircraft aluminum
Dimensions: 41.6 W X 69 H X 29.5 D 

Placement from the wall (cm):
30 - 60

Finish: matte black or natural aluminum

Recommended room size (kvm2)
: 15 - 30 

The recommended power amplifier: 30 - 200 watts

Sensitivity: 87 dB

Nominal average impedance: 
6 - 8 ohm

Frequency: 32 Hz - 38 kHz
© Storgaard & Vestskov 2024
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram