FRIDA

Combining Beauty with Power.
Our most extremely accomplished bookshelf loudspeaker.
Goes Below 30 Hz
You need to hear it for yourself.
If you judged this speaker solely by its size, you’d be mistaken. Frida has a personality that makes it feel twice as big. Frida is dynamic, highly resolving, and very evenly balanced throughout the frequency spectrum. 

Frida is for everyone whose budget and audio aspirations exceed their living space limitations. We would go so far as to say that this speaker has no equal when it comes to size, sound, and design.
Top End Componets 
The crossover is a 12 dB Linkwitz/Riley with incorporated T.I.M. reduction circuits 2750 Hz 12 dB per octave.

The tweeter by SB Acoustics is a 38 mm ring radiator selected to reproduce overtones freely, detailed, with very high resolution, and no tendency for intrusive resonances.

For the mid and low frequencies, we use a 5-inch woven mineral cone by SEAS with excellent internal damping and extremely linear frequency response.

The optimized center bullet reduces compression due to temperature variations in the voice coil.

The lower suspension reduces sound reflection air flow noise and keeps cavity resonance to a minimum.
Ready to Connect

With terminals from WBT, Miflex, and Jantzen 3mm coils, and internal wiring from Van den Hul in a special hybrid configuration of pure copper and silver plating, Frida ensures unparalleled signal processing and minimal signal degradation.
The Highest Quality
In-house production in Denmark at our BEAUTIFUL island, Bornholm.
The cabinets are fabricated using a 5-layer solid tiger bamboo extreme (26mm). By mixing carbonized and natural bamboo strips, each panel is unique, securing each customer with a pair of speakers that are one of a kind.

Tiger bamboo extreme is a premium material for several reasons: it offers a more environmentally friendly choice due to its rapid renewability. It provides exceptional strength and durability, comparable to the strongest hardwoods, ensuring long-lasting speaker cabinets. Its excellent acoustic properties enhance sound quality by reducing unwanted vibrations and resonance, while its unique aesthetic appeal adds elegance with a distinctive striped pattern.

The front baffles are made from aircraft aluminum produced on 5-axis CNC machines and are designed with a distinct pattern to minimize reflections for optimal sound reproduction.

Aircraft aluminum is a premium material that enhances the structural integrity and longevity of our speakers, providing unmatched reliability.
Specifications
Terminology: 2-way passive loudspeaker

Dimensions (cm):
22 W x 35 H x 34 D

Weight: 12.5 kg (27.5 lbs) (without speaker stand)

Accessories: a speaker stand in aircraft aluminum
Dimensions:
41.6 W X 69 H X 29.5 D
Weight: 8 kg (17.6 lbs)

Weight Shipping: 61.5 kg (135.5 lbs)

Placement from the wall (cm):
30 - 60

Recommended room size (kvm2): 15 - 30

The recommended power amplifier: 30 - 200 watts

Sensitivity: 87 dB

Nominal average impedance:
6 - 8 ohm

Frequency: 32 Hz - 38 kHz

FINISH

Finish (aluminum): metallic matte black or natural aluminum

Finish (bamboo): gloss or matte clearcoat

© Storgaard & Vestskov 2024
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram